PORSCHE CAYMAN PLENUM
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
The all new specifically designed ipd 3.6l dfi intake plenum is a direct bolt-on upgrade that replaces the factory air distributor and utilizes all pre-existing factory hardware including the oe factory throttle body.
The superior design of the dfi ipd plenum provides an additional 14 horsepower at the wheels. Unlike previous naturally aspirated ipd plenums that delivered stronger gains in the mid range, the new ipd dfi plenums deliver a similar shaped power curve as the factory but are considerably stronger from the mid range to redline without any power loses down low.
Installation of the new ipd 3.6l dfi plenum is relatively straight forward and can be installed by mechanically inclined diy cus...(choose a part on the right to read more)
General Fitment 911 2009-12
$1,478.25
Make a selection
The dfi Porsche engine package is a finely tuned performance machine and additional power has proved difficult to find. The unique design of Porsche's new dfi intake system posed very challenging tuning hurdles but once again ipd developed a design that out performs the factory intake system without compromising reliability and drive-ability.
This innovative and revolutionary ipd dfi intake plenum employs the patented y design as well as an enlarged plenum area that allows for improved intake air speed and velocity resulting in performance increases without any loses in power.
*contact us for special pricing.*
General Fitment 911 2009-12
$1,478.25
Make a selection
Ipd intake plenum Porsche 997 s 3.8l 05+
The ipd plenums are a unique design that dramatically increases horsepower and torque by optimizing air flow efficiency. Air flow is managed through a diversion splitter that maximizes air speed into the engine. The charged intake air maintains a higher velocity by replacing the factory plastic "t" intake with a stronger and more efficient cast aluminum "y" design. This unique "y" style plenum optimizes flow, improving acceleration and boost response. The new ipd replacement plenum eliminates the turbulent air flow by smoothly splitting and diverting the air flow and directing it towards the cylinders at a much higher air speed. This simple bolt-on plenum upg...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,208.25
Make a selection
From the factory, Porsches turbo models come with a bulky, restrictive cast intake air distributor plenum and inadequate diameter piping to the intake side of the turbochargers. This piping also causes a difference in boost pressure of up to .3 bar between the left and right side turbos and is not suited for higher horsepower applications.
In order to obtain tuning gains over 530 hp for turbocharged vehicles it is necessary to install our FVD intake plenum kit. The lightweight aluminum FVD intake plenum kit balances the boost pressure between the turbochargers and significantly increases the volume of the intake air to the turbos.
FVD intake plenum kit increased power in the midrange up to 25hp in combinati...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 BOXSTER 2005-08
$1,094.50
Make a selection
Adding bolt-on horsepower to the 997 turbo is a continuous quest by many enthusiasts looking for more power. reverting back to old tuning technologies, agency power has developed a larger throttle body and plenum kit for the Porsche 997 turbo to gain added performance. the point of a larger throttle body is to get in more air. The more air you bring in, the more power you make. The 997 turbo's engine intake system works off pulses, so how that air is diverted to either side of the engine is not as important as the volume incoming.
The plenum kit includes an OEM Porsche Cayenne turbo throttle body (part# 94860511503) which is a direct bolt on and plug in for the electronic throttle control with no modifica...(choose a part on the right to read more)
General Fitment 911 2005-08
The ipd Cayenne/panamera turbo plenum has a revised diversion area and larger inlet openings that further optimizes intake air speed and volume. This more efficient design provides substantial power increases of an additional 30+ horsepower and 32+ foot pounds of torque.
The Cayenne/panamera turbo plenum performance gains are throughout the entire power curve and provide additional power that can be felt in the "seat of your pants".
The factory plastic intakes are also prone to cracking, especially with Cayenne turbos producing higher boost levels. The ipd plenum will not crack and will handle the highest of boost levels.
The ipd plenum utilizes all the factory hardware including the oe 76mm throttl...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
The speedtech 996 twin turbo fresh air intake plenum is designed to enhance the performance of your Porsche 996 tt by allowing fresh air to flow freely to the turbos for quick spool and additional power - very important for modified cars running larger than OEM turbos or running high boost.
The system consists of speedtech hi-flow intake plenum with 70mm outlet tubes and silicon hose is supplied to connect to the turbo inlets. The speedtech hi-flow plenum is designed to flow more air than the OEM plenum and deliver it quickly and smoothly with no restrictions from the maf tube all the way to the turbo inlets. A very worthwhile and important upgrade to maximize power for all modified 996 twin turbos.
...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$1,478.25
Make a selection
Agency power has just given Porsche 996tt owners another way to get an easy 20 bolt-on horsepower with this new big mouth plenum and throttle body kit. agency power set out to engineer and design a plenum that was functional, did not require additional tuning, and simply. Made power! the plenum is 6061 aluminum that retains the same shape as the factory t pipe. the reason to keep a standard t shape is that the engine works off of pulses. just like how Porsche designed, agency power kept this design and simply improved the restriction, the throttle body. the factory throttle body inlet size is 76mm that then jumps up to a 78mm id plastic plenum.
Agency power has chosen to use a 78mm Cayenne turbo thro...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
Just like the Carrera s, it's difficult to find power for the naturally aspirated 3.4l Carrera, but the ipd plenum does it better than any other after market mod available. This simple bolt on performance upgrade replaces the factory plastic air distributor with the ipd patented aluminum "y" style plenum.
The ipd plenum delivers impressive horsepower gains of 25 and torque gains of 22 by means of a superior and more efficient design. These gains are mainly felt in the mid range where it is most needed and most enjoyed but performance improvements are realized throughout the entire rev range. Impressive performance improvements like this will truly transform your Porsche driving experience.
These added ...(choose a part on the right to read more)
General Fitment 911 1998-05
The 996 turbo 68mm version is designed to function with the factory 68mm throttle body that was o.e. On all 996 factory turbos. The 68mm plenum delivers similar power as the larger 74mm competition plenum.
Horsepower gains range from 30 to 35 above the stock power band and initial boost response is improved. The ipd plenum delivers more power and more torque giving the 996 turbo a stronger mid range and top end.
The 68mm plenum version is perfect for the turbo customer looking to improve engine performance on both stock and moderately modified turbos developing under 700 horsepower.
The ipd 996 turbo plenum will truly transform the already impressive turbo performance. The plenum should be the first p...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
Turbo customers looking to increase engine power without pushing the motorsport envelope to redline would best benefit from the 74mm ipd turbo plenum.
This version of the 997 turbo plenum utilizes the factory 74mm throttle body and delivers impressive performance gains for both stock and slightly modified turbos with exhaust and software. Beyond these performance mods we recommend upgrading to the larger 82mm ipd turbo plenum.
The 74mm ipd turbo plenum is also designed to perform with the higher flowing ipd “y” pipe, part number ripd97274.
Installation is relatively easy and straight forward for mechanically inclined diy customers although ipd strongly recommends having a qualified Porsche technici...(choose a part on the right to read more)
General Fitment 911 2005-08
The 996 turbo 74mm “competition” plenum is designed to function with more seriously modified turbos developing over 600+ horsepower. Although this 74mm application has been used with great success on a variety of turbos ranging from mildly modified to 1000+ hp.
This application requires the larger 74mm Porsche throttle body (additional purchase required) and comes with additional hardware to complete the kit. This “competition turbo” plenum will help modified 996 turbos realize maximum performance. The increased air flow and air speed develop by the larger plenum is designed to work with larger turbos, intercoolers, intake piping, high flow y pipes and more aggressive software.
Horsepower gains s...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
As with all GT3's, power improvements are very difficult to develop because of Porsche's fantastic out-of-the-box design and development on these performance minded machines.
The GT3 engine was specifically developed to deliver power where it's needed on the track, way up high in the rev range. The ipd plenum compliments that power by delivering additional horsepower throughout the entire power band, especially in the mid range where it's most needed.
The 996 GT3 ipd plenum provides an additional 24 horsepower at the wheels, enhancing the already ultimate Porsche driving experience. The 996 GT3 plenum is specifically designed to accommodate the larger 997 GT3 82mm throttle body (sold separately, part ...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05
The 997s ipd plenum provide power increases throughout the entire power band. Gains of 28 horsepower and 26 foot pounds of torque are experienced in the midrange with gains of 11 to 12 hp at the peak.
The "y" design of the 3.8 liter ipd plenum also allows for a more linear power delivery and improved throttle response that elevates the 997 s Carrera driving experience even higher.
Power improvements will be fully realized once the factory dme makes all the necessary “adaptation” requirements which occurs after a series of hard pulls on the dyno or full throttle runs (at your local race track of course).
The 997s ipd plenum is a direct bolt on replacement and installation is relatively straight fo...(choose a part on the right to read more)
General Fitment 911 2005-08
Power obsessed turbo customers looking to push the motorsport envelope a little harder would best benefit from the larger 82mm “competition” ipd plenum fitted with a factory 997 GT3 82mm Porsche throttle body (sold separately).
The larger 82mm intake opening allows for even greater air flow to help optimize the more extreme mods such as larger turbos, intercoolers, y pipes and more aggressive software.
This larger version plenum is also designed to perform with the higher flowing ipd “y” pipe.
Gt3 82mm throttle body (part number rtb0082) needed for this plenum to work.
General Fitment 911 2005-08
The all new specifically designed ipd 3.8l dfi intake plenum is a direct bolt-on upgrade that replaces the factory air intake distributor and utilizes all pre-existing factory hardware and throttle body.
The improved ipd intake design allows for smoother, less turbulent and more efficient air flow resulting in impressive power and torque gains for Porsche driving enthusiasts.
The superior design of the dfi ipd plenum provides an additional 15 horsepower at the wheels. Unlike previous naturally aspirated ipd plenums that delivered stronger gains in the mid range, the new ipd dfi plenums deliver a similar shaped power curve as the factory but are considerably stronger from the mid range to redline without a...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$1,095.00
Make a selection
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,579.60
Make a selection
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,094.50
Make a selection
Known as: cover lateral / cover plenum panel lateral
View/Change Diagram
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|